materials eclipse is made of corrosion resistant 356 aluminum alloy with a copper (cu) content of less than 0.1%. led printed circuit board is assembled with a cast aluminum heat sink designed with fins pattern to optimize heat dissipation and luminaire efficacy. the driver is enclosed in a separate cast aluminum chamber with a tool-less hinge mechanism allowing a quick access for electrical maintenance without disturbing the optical light chamber. the lower cast aluminum housing fits on a 4 (102) or 5 (127) pole and contains all electrical controls on a removable tray. electrical led driver 120/277v multi volt (50-60hz) with a minimum starting temperature of -30oc/-22of. optional 347v on request. output over voltage, output over current and output short circuit protection with auto-recovery. over temperature protection (110oc). led standard 4000ok led platform included. optional 3000ok and 3500ok. removable modular led platform. life 51,000hrs l 77 b 50 (based on iesna tm-21 test method and lm-80 data). 68,000hrs l 70 b 50 (calculated projection from lm-80 data). finish five-stage preparation process including preheating of cast parts for air extraction, and an environmentally friendly alloy sealant. polyester powder coating is applied through an electrostatic process and oven cured for long term finish. mounting maximum weight : 33lbs (15kg) eclipse is designed for ease of access and installation. standard luminaire fits on a 4 (102) or 5 (127) pole. alternate poles or wall attachments are proposed with high quality components to meet multiple installation conditions. certification tested to ul1598 and csa 22.2 #250. etl listed wet location. photometric testing performed by an independent laboratory in accordance with ies lm-79-08 standards at 25oc. lumen depreciation in accordance with iesna lm80 standards. ce certification on request. rated ip65. 1 1 3 4 2 6 7 5 8 30.375 (770) 30 (762) W769 epa: 0.7 W769 eclipse - led sept 2014 rev 0 W769 1- one piece .090 thick hard aluminum to shade. underside surface is painted white enamel to optimize light performance. 2- inner white enamel reflector. 3- set of 4 x 1/2 solid aluminum struts. 4- led sealed optical beam control lens. 5- cast aluminum led heat sink. 6- cast aluminum top assembly base support with hinged mechanism. 7- 120/277v or 347v electronic driver power supply. 8- lower cast aluminum housing with 4 or 5 (102 or 127) o.d pole adaptor. eclipse features a unique tool less swing out shade assembly, allowing a quick access to luminaire maintenance, leaving a clean optical chamber to ensure a high lumen performance. access to electrical components luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis.com luminis type: quantit y: project: catalog number: fixtu re watta ge volta ge finis h option option option option
2 W769 eclipse - led sept 2014 rev 0 notes 1- luminaires are factory prewired for 120v (if no voltage is specified.) for other voltages, please specify with catalog number, or consult factory. 2- fuse and photo cell options are normally installed with poles when specified with luminis luminaires. (except for other types of mounting.) mounting electrical aca pole mounted attachment with 45o support acw wall mounted attachment with 45o support ec3p pole mounted twin arm attachment ec3w wall mounted twin arm attachment tn3 3 tenon pole adaptor pr7 pedestal mount adaptor fs fuse 2 ph photocell 2 347l 347v input power driver alternate cct ok led k3 3000ok cct led k35 35 00ok cct led standar d colors wht snow white bkt jet black bzt bronze mst matte silver grt titanium gray dgt gun metal cht champagne optional colors cs custom color ral ral# color (refer to color chart) 120v 277v optional 347v model# led l ight selection voltage 1 finish suffix l1w65r1 input watts 60w delivered lumens 4892 cri 80 cct ok 4000 ok W769 luminaire selection descriptive information total lms: 4892 lumens total input watts: 59.99 w source: led total efficiency: 81.55% bug rating: b2-u3-g1 cutoff classification: cutoff distribution: type v cct/cri: 4000ok / 80 cri outdoor report polar graph maximum candela = 1288 located at 27.5 o W769-l1w65r1 please visit our web site www.luminis.com for complete i.e.s. formatted download data. typical photometry summary options luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis.com luminis
3 paa pole series psb pole series pst pole series 34.5 (876) 28 (711) 38.5 (978) 30 (762) 17.75 (451) 12 (304) 20 (508) (3) 5/8 dia. (16) mounting holes @120o 6 dia. (152) bolt circle 2 dia. (51) power entry 8 dia. (203) base W769 eclipse - led sept 2014 rev 0 pole mount aca 1 1 x 3 extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5 dia. poles. 1/2 dia. x 45o standard natural stainless steel rod support. (epa: 0.7) ec3p 1 set of (2) 1 x 3 extruded aluminum side pole straight mounting. designed for luminaires with or less shades. pole mounting adaptor fits with 4 to 5 dia. poles. (epa: 0.97) pr7 8 dia.(203) x 8 3/4 (222)h. extruded aluminum stand designed for short walls or pier mount. no te 1 : pca pole with aca attachment requires a 30 (762) tenon extension over pole nominal height. ec3p and ec3ps require an 18 tenon extension. factory installed. ? 4 ? 5 ? 4 tapered ? 4 height pole paa410 paa510 pst10 ------- psb10 10 ft. (3 m) paa412 paa512 pst12 ------- psb12 12 ft. (3,6 m) paa414 paa514 pst14 ------- psb14 14 ft. (4,2 m) paa416 paa516 pst16 pta16 psb16 16 ft. (4,8 m) paa418 paa518 ------- pta18 psb18 18 ft. (5,5 m) paa420 paa520 ------- pta20 ps b20 20 ft. (6,0 m) ------- ------- ------- pta25 ------- 25 ft. (7,6 m) for additional pole details, please refer to separate pole specification sheet. ? 4= 100mm ?5= 127mm matchi ng pole selection 38.5 (978) luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis.com luminis
4 20 (508) power feed 28 (711) power feed 4 . 6 2 5 (118) 3 (76) 1 7 . 7 5 (451) power feed 3 (76) 4 . 6 2 5 (118) power feed 6 . 1 2 5 (156) 38.5 (978) W769 eclipse - led sept 2014 rev 0 wall mount acw 1 x 3 (25x76) extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2 dia. x 45o standard natural stainless steel rod support. ec3w set of (2) 1 x 3 (25x76) extruded aluminum wall mount arms with cast aluminum wall plate. designed for luminaires with or less shades. mounting mounting 38.5 (978) luminaires may be altered for design improvements or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis.com luminis
|
